pacwear-coating

PacWear Logo

COATING

  • Apply a uniform first coat of adhesive to the primed metal surface and allow it to dry.
  • At the same time apply a coat of adhesive to the rubber surface using a stiff brush. With a circular motion, scrub or work the adhesive into the rubber applying a uniform coating and allow it to dry.
  • NOTE: If the surface of the rubber has already been primed, as with the PBI Lagging systems, apply the adhesive coating with a brush or roller with a rolling or painting action. DO NOT SCRUB the adhesive into the primed surface.
  • Once the primed surfaces are dry, apply a second tie coat to both surfaces. When the surfaces are dry to a tack; normally this takes about 8 to 12 minutes; the two surfaces can be bonded together.